BIOFIL® Soil Guard inoculant and bacterial preparation purposefully increases the number of beneficial microbes, supporting plant nutrition, health and soil structure building. It fits harmoniously into the plant-soil microbiota biological system.
Let's protect the health of our soils and plants together!
Apply our BIOFIL® Soil Guard product for an environmentally friendly yield increase!
Advantages of using BIOFIL® Soil Guard inoculant:
BIOFIL® Climate inoculant has been specifically developed by researchers to mitigate the adverse effects of climate change. Sudden rainfall and drought-stricken periods are having a detrimental effect on our already stressed farmland. As a result of BIOFIL® Climate, the soil structure recovers, water balance improves, soil life becomes more intensive and the nutrients are not washed out. The product is mainly recommended for sand, physically sandy loam-like soils, humus sand or degraded dusty soils.
Advantages of using BIOFIL® Climate inoculant:
BIOFIL® Climate bacterial preparation can be used on sandy soils, sandy physically loam-like soils, loose or degraded dusty soils (between pH 5.0 and 8.0) to stimulate microbial life of the soil, to improve soil structure and water balance of soil and plant; in all arable and horticultural crops, depending on the soil moisture content and the application device, with a water volume of 50-400 l/ha, during soil preparation or at least at sowing, sprayed on the soil, than rotated to a depth of 5 to 10 cm.
The product has two components:
Dose of component “A3”: 1-2 l/ha (in horticultural crops 2 l/ha).
Dose of the “Extra” additive component: 1-2 l/ha (for sandy soils and horticultural crops with a humus content of less than 1.5 %, at least 2 l/ha).
The BIOFIL® "Extra" additive can be applied together with any other type of BIOFIL® product! It is advisable to carry out a miscibility test before application!
The use of the products is not recommended for strongly bound soils (clay loam, clay or saline clay)! In the case of no-till cultivation, the product can be applied to the seed furrow with a water volume of 30-40 l/ha.
BIOFIL® Extra additive can be used universally for all BIOFIL® products! A special blend of plant-based carbohydrates, trace elements and vitamins, as well as essential amino acids, which helps the bacterial strains in BIOFIL® products to grow faster and to a greater extent in a shorter time. At the same time, it also helps to reduce the negative effects on soil life by the action of components that are also beneficial to the soil microbiota.
Recommended dose of “Extra” additive: 1-2 l/ha (at least 2 l/ha for sandy soils and horticultural crops with a humus content of less than 1.5 %).
The product can also be applied together with fertilizers and pesticides!
The BIOFIL® "Extra" additive can be applied together with any BIOFIL® product! It is advisable to carry out a miscibility test before co-application with other products!
Composition: plant extracts, plant sugars, water.
BIOFIL® Soil Guard bacterial preparation is used to stimulate microbial life of various soils (pH 4.5-9) in all arable and horticultural crops, depending on soil moisture and application, with 50-400 l / ha water at the time of preparation or sprayed on the soil and then turned to a depth of 5 to 10 cm.
The product has two components:
Component "A" dose: 1-1,5 l / ha.
Component "B" dose: 0,2-0,4 l / ha.
Component "A" can be replaced by: BIOFIL® Soil pH specific soil bacterial preparations.
Component "B" can also be used at a rate of 0,4 l / ha at a concentration of up to 0.5% during the growing season, but in this case the preparation must be irrigated to the soil surface.
In the case of "no till" or direct sowing, the product can be applied to the seed furrow with 10-20 l / ha water.
Average live germ count:
Component "A": 2.39 x 10 9 cells / ml.
Component "B": 1.26 x 10 9 cells / ml.
Regarding public health, it is non-toxic to plants, animals, humans, non-dangerous and non-infectious.
Component "A": Pseudomonas sp., Kocuria sp., Azospirillum sp.
Component "B": Bacillus sp. bacteria.
Unfortunately most of the soils in our country do not have neutral pH. For a long time there was a need to create a new product family that offers a solution specifically for degraded and non-beneficial soils and planting areas. Thus we created our products, which consist of bacteria strains individually isolated, but resultant from soils of the Carpathian Basin, which unlike traditional inoculating strains can function effectively even in extreme soils.
To stimulate soil life in acidic soils (pH 4-7), in amount of 1,0 l/ha, depending on the spraying tool with 50-400 l/ha water, sprayed and then rotated into the soil before seeding or planting. Shake up the product before using! Do not mix the preparation with bactericides and fungicides!
Bacillus simplex, Pseudomonas frederikbergensis, Agreia pratensis, Paenibacillus peoriae, Exiguobacterium acetylicum, Azospirillum largimobile, Azospirillum brasilense
To stimulate soil life in neutral soils (pH 6-8), in amount of 1,0 l/ha, depending on the spraying tool with 50-400 l/ha water, sprayed and then rotated into the soil before seeding or planting. Do not mix the preparation with bactericides and fungicides!
number of germs in general: 1,5x109 cell/ml
not hazardous, toxic or infectious for plants, animals or human beings
the preparation contains 7 bacteria strains
Pseudomonas jessenii, Arthrobacter crystallopoietes, Kocuria rosea, Azospirillum brasilense strains, Azospirillum largimobile
To stimulate soil life in alkaline soils (pH 4-7), in amount of 1,0 l/ha, depending on the spraying tool with 50-400 l/ha water, sprayed and then rotated into the soil before seeding or planting. Do not mix the preparation with bactericides and fungicides!
Pseudomonas jessenii, Arthrobacter crystallopoietes, Pseudomo- nas chlororaphis, Exiguobacterium acetylicum, Azospirillum brasilense, Azospirillium largimobile, Azospirillum irakense
In our country the use of forage protein is mostly based on soya. For growing soya and peas in Hungarian soils in larger amount, the land sown for their production will expand, and these programmes will get widespread support.
The inoculating product BIOFIL Pea contains pea-symbiont bacteria strains which effectively form nodules, especially on peas, and fixation of nitrogene is very powerful in the nodules.
As an effect of treatment by our product formination of nodules becomes more intensive, thus plants become better provided with nitrogene, peas become healthier and more developed, more resistant to various diseases, yield increases remarkably, even by 20-60%.
The value and quality of crops also increases. For effective treatment use the inoculating bacterial product BIOFIL Soya combined with the soil-, and pH-specific inoculating bacterial product BIOFIL Normal, Acidic or Alkaline.
The bacteria strain in the product (Rhizobium leguminosarum) is plant-specific, and is able to inoculate peas (Pisum sativum), field beans (Vicia faba), vetch (Vicia spp.), lentils (Lens culinaris) and vetchlings (Lathyrus spp.). The strain is not effective in case of other plant cultures.
The bacterial inoculant BIOFIL Soya is responsible for soya nodulation, it contains a symbiont nitrogen-fixing bacteria strain (Bradyrhizobium japonicum).
The nodulation of soya plants affects the health conditions and availability of nitrogen for plants. Yield increase can even be 20-60%.
Nitrogen remaining after the plant culture affects positively yield results of the following crop too. For effective treatment use the inoculating bacterial product BIOFIL Soya combined with the soil pH specific inoculating bacterial products BIOFIL. We recommend to use soil inoculating preparations BioFil® (soil specific) and BioFil® Soya even if you use seeds inoculated with nodule forming bacteria.
The Bradyrhizobium japonicum bacteria strain is plant specific, it forms nodules only on the roots of soya, and is not effective in case of other Fabaceae plants.
The bacterial product BIOFIL Post Harvest provides effective degradation of herbal remains, such as stem, leaf and root. So that the next plant culture gets access to valuable nutrients.
The product contains bacteria strains which live in inland soils, but usually in small amounts. Using the product we can gain fast and intensive degradation of cellulose. Bacteria which the product consists of are able to multiply even in low soil temperature. The products consist of bacteria strains which have a wide spectre of soil pH-tolerance, this is why the Post Harvest product can be used effectively in acidic, normal and alkaline soils. The BIOFIL Post Harvest contains nitrogenfixing bacteria strains of high capacity, this is why we don't need to apply plus nitrogen for stalk degradation. The product is effective against harmful pathogeneous fungi propagating in the soil.
In case of stalks of average amount we recommend to use 0,5 l BIOFIL Post Harvest together with 0,5 l BIOFIL soil specific preparation by spraying them onto the stalks with 25-50 or 200-400 litres/ha of water, depending on the spraying tool. After that the product has to be incorporated into the soil. In case of larger amounts of stalks we recommend to use 1 l/ha BIOFIL Post Harvest. After sunflower and maize, if you are planning to plant the following crop the same year, add 1 l/ha BIOFIL Post Harvest to 0,5-1 l/ha BIOFIL soil pH specific product. The product is the most effective when placed onto stalks directly before thei rotation.
Cellvibrio fibrivorans, Brevundimonas mediterranea, Achromobacter spanius, Azotobacter chroococcum